{tab Product Description}
Nyloc nut & bolt joints are used where a tight fitting joint is required, a nyloc nut is used to secure the limb or head on teddy bears.
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
{tab Product Data}
One complete set of 5 nyloc nut & bolt joints includes; 10 hardboard discs, 10 steel washers & 5 nyloc nuts & 5 bolts (one of which is longer to be used for ease of fitting when attaching the head of your teddy bears.
Nyloc nut & Bolt joints are available in sets of 5 or in bulk from 18 - 76mm.
We use a M3 (5.5mm) bolt for 18-35mm discs and M5 (8mm) for 38-76mm discs.
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
{/tabs}
{tab Product Description}
Nyloc nut & bolt joints are used where a tight fitting joint is required, a nyloc nut is used to secure the limb or head on teddy bears.
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
{tab Product Data}
One complete set of 5 nyloc nut & bolt joints includes; 10 hardboard discs, 10 steel washers & 5 nyloc nuts & 5 bolts (one of which is longer to be used for ease of fitting when attaching the head of your teddy bears.
Nyloc nut & Bolt joints are available in sets of 5 or in bulk from 18 - 76mm.
We use a M3 (5.5mm) bolt for 18-35mm discs and M5 (8mm) for 38-76mm discs.
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
{/tabs}
{tab Product Description}
Nyloc nut & bolt joints are used where a tight fitting joint is required, a nyloc nut is used to secure the limb or head on teddy bears.
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
{tab Product Data}
One complete set of 5 nyloc nut & bolt joints includes; 10 hardboard discs, 10 steel washers & 5 nyloc nuts & 5 bolts (one of which is longer to be used for ease of fitting when attaching the head of your teddy bears.
Nyloc nut & Bolt joints are available in sets of 5 or in bulk from 18 - 76mm.
We use a M3 (5.5mm) bolt for 18-35mm discs and M5 (8mm) for 38-76mm discs.
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
{/tabs}
{tab Product Description}
Nyloc nut & bolt joints are used where a tight fitting joint is required, a nyloc nut is used to secure the limb or head on teddy bears.
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
{tab Product Data}
One complete set of 5 nyloc nut & bolt joints includes; 10 hardboard discs, 10 steel washers & 5 nyloc nuts & 5 bolts (one of which is longer to be used for ease of fitting when attaching the head of your teddy bears.
Nyloc nut & Bolt joints are available in sets of 5 or in bulk from 18 - 76mm.
We use a M3 (5.5mm) bolt for 18-35mm discs and M5 (8mm) for 38-76mm discs.
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
{/tabs}
{tab Product Description}
Nyloc nut & bolt joints are used where a tight fitting joint is required, a nyloc nut is used to secure the limb or head on teddy bears.
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
{tab Product Data}
One complete set of 5 nyloc nut & bolt joints includes; 10 hardboard discs, 10 steel washers & 5 nyloc nuts & 5 bolts (one of which is longer to be used for ease of fitting when attaching the head of your teddy bears.
Nyloc nut & Bolt joints are available in sets of 5 or in bulk from 18 - 76mm.
We use a M3 (5.5mm) bolt for 18-35mm discs and M5 (8mm) for 38-76mm discs.
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
{/tabs}
{tab Product Description}
Nyloc nut & bolt joints are used where a tight fitting joint is required, a nyloc nut is used to secure the limb or head on teddy bears.
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
{tab Product Data}
One complete set of 5 nyloc nut & bolt joints includes; 10 hardboard discs, 10 steel washers & 5 nyloc nuts & 5 bolts (one of which is longer to be used for ease of fitting when attaching the head of your teddy bears.
Nyloc nut & Bolt joints are available in sets of 5 or in bulk from 18 - 76mm.
We use a M3 (5.5mm) bolt for 18-35mm discs and M5 (8mm) for 38-76mm discs.
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
{/tabs}
{tab Product Description}
Nyloc nut & bolt joints are used where a tight fitting joint is required, a nyloc nut is used to secure the limb or head on teddy bears.
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
{tab Product Data}
One complete set of 5 nyloc nut & bolt joints includes; 10 hardboard discs, 10 steel washers & 5 nyloc nuts & 5 bolts (one of which is longer to be used for ease of fitting when attaching the head of your teddy bears.
Nyloc nut & Bolt joints are available in sets of 5 or in bulk from 18 - 76mm.
We use a M3 (5.5mm) bolt for 18-35mm discs and M5 (8mm) for 38-76mm discs.
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
{/tabs}
{tab Product Description}
Nyloc nut & bolt joints are used where a tight fitting joint is required, a nyloc nut is used to secure the limb or head on teddy bears.
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
{tab Product Data}
One complete set of 5 nyloc nut & bolt joints includes; 10 hardboard discs, 10 steel washers & 5 nyloc nuts & 5 bolts (one of which is longer to be used for ease of fitting when attaching the head of your teddy bears.
Nyloc nut & Bolt joints are available in sets of 5 or in bulk from 18 - 76mm.
We use a M3 (5.5mm) bolt for 18-35mm discs and M5 (8mm) for 38-76mm discs.
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
{/tabs}
{tab Product Description}
Nyloc nut & bolt joints are used where a tight fitting joint is required, a nyloc nut is used to secure the limb or head on teddy bears.
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
{tab Product Data}
One complete set of 5 nyloc nut & bolt joints includes; 10 hardboard discs, 10 steel washers & 5 nyloc nuts & 5 bolts (one of which is longer to be used for ease of fitting when attaching the head of your teddy bears.
Nyloc nut & Bolt joints are available in sets of 5 or in bulk from 18 - 76mm.
We use a M3 (5.5mm) bolt for 18-35mm discs and M5 (8mm) for 38-76mm discs.
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
{/tabs}
{tab Product Description}
Nyloc nut & bolt joints are used where a tight fitting joint is required, a nyloc nut is used to secure the limb or head on teddy bears.
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
{tab Product Data}
One complete set of 5 nyloc nut & bolt joints includes; 10 hardboard discs, 10 steel washers & 5 nyloc nuts & 5 bolts (one of which is longer to be used for ease of fitting when attaching the head of your teddy bears.
Nyloc nut & Bolt joints are available in sets of 5 or in bulk from 18 - 76mm.
We use a M3 (5.5mm) bolt for 18-35mm discs and M5 (8mm) for 38-76mm discs.
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
{/tabs}
{tab Product Description}
Nyloc nut & bolt joints are used where a tight fitting joint is required, a nyloc nut is used to secure the limb or head on teddy bears.
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
{tab Product Data}
One complete set of 5 nyloc nut & bolt joints includes; 10 hardboard discs, 10 steel washers & 5 nyloc nuts & 5 bolts (one of which is longer to be used for ease of fitting when attaching the head of your teddy bears.
Nyloc nut & Bolt joints are available in sets of 5 or in bulk from 18 - 76mm.
We use a M3 (5.5mm) bolt for 18-35mm discs and M5 (8mm) for 38-76mm discs.
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
{/tabs}
{tab Product Description}
Nyloc nut & bolt joints are used where a tight fitting joint is required, a nyloc nut is used to secure the limb or head on teddy bears.
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
{tab Product Data}
One complete set of 5 nyloc nut & bolt joints includes; 10 hardboard discs, 10 steel washers & 5 nyloc nuts & 5 bolts (one of which is longer to be used for ease of fitting when attaching the head of your teddy bears.
Nyloc nut & Bolt joints are available in sets of 5 or in bulk from 18 - 76mm.
We use a M3 (5.5mm) bolt for 18-35mm discs and M5 (8mm) for 38-76mm discs.
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
{/tabs}
{tab Product Description}
Nyloc nut & bolt joints are used where a tight fitting joint is required, a nyloc nut is used to secure the limb or head on teddy bears.
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
{tab Product Data}
One complete set of 5 nyloc nut & bolt joints includes; 10 hardboard discs, 10 steel washers & 5 nyloc nuts & 5 bolts (one of which is longer to be used for ease of fitting when attaching the head of your teddy bears.
Nyloc nut & Bolt joints are available in sets of 5 or in bulk from 18 - 76mm.
We use a M3 (5.5mm) bolt for 18-35mm discs and M5 (8mm) for 38-76mm discs.
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
{/tabs}
{tab Product Description}
Nyloc nut & bolt joints are used where a tight fitting joint is required, a nyloc nut is used to secure the limb or head on teddy bears.
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
{tab Product Data}
One complete set of 5 nyloc nut & bolt joints includes; 10 hardboard discs, 10 steel washers & 5 nyloc nuts & 5 bolts (one of which is longer to be used for ease of fitting when attaching the head of your teddy bears.
Nyloc nut & Bolt joints are available in sets of 5 or in bulk from 18 - 76mm.
We use a M3 (5.5mm) bolt for 18-35mm discs and M5 (8mm) for 38-76mm discs.
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
{/tabs}
{tab Product Description}
Nyloc nut & bolt joints are used where a tight fitting joint is required, a nyloc nut is used to secure the limb or head on teddy bears.
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
{tab Product Data}
One complete set of 5 nyloc nut & bolt joints includes; 10 hardboard discs, 10 steel washers & 5 nyloc nuts & 5 bolts (one of which is longer to be used for ease of fitting when attaching the head of your teddy bears.
Nyloc nut & Bolt joints are available in sets of 5 or in bulk from 18 - 76mm.
We use a M3 (5.5mm) bolt for 18-35mm discs and M5 (8mm) for 38-76mm discs.
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
{/tabs}
{tab Product Description}
Nyloc nut & bolt joints are used where a tight fitting joint is required, a nyloc nut is used to secure the limb or head on teddy bears.
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
{tab Product Data}
One complete set of 5 nyloc nut & bolt joints includes; 10 hardboard discs, 10 steel washers & 5 nyloc nuts & 5 bolts (one of which is longer to be used for ease of fitting when attaching the head of your teddy bears.
Nyloc nut & Bolt joints are available in sets of 5 or in bulk from 18 - 76mm.
We use a M3 (5.5mm) bolt for 18-35mm discs and M5 (8mm) for 38-76mm discs.
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
{/tabs}
{tab Product Description}
Nyloc nut & bolt joints are used where a tight fitting joint is required, a nyloc nut is used to secure the limb or head on teddy bears.
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
{tab Product Data}
One complete set of 5 nyloc nut & bolt joints includes; 10 hardboard discs, 10 steel washers & 5 nyloc nuts & 5 bolts (one of which is longer to be used for ease of fitting when attaching the head of your teddy bears.
Nyloc nut & Bolt joints are available in sets of 5 or in bulk from 18 - 76mm.
We use a M3 (5.5mm) bolt for 18-35mm discs and M5 (8mm) for 38-76mm discs.
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
{/tabs}
{tab Product Description}
Nyloc nut & bolt joints are used where a tight fitting joint is required, a nyloc nut is used to secure the limb or head on teddy bears.
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
{tab Product Data}
One complete set of 5 nyloc nut & bolt joints includes; 10 hardboard discs, 10 steel washers & 5 nyloc nuts & 5 bolts (one of which is longer to be used for ease of fitting when attaching the head of your teddy bears.
Nyloc nut & Bolt joints are available in sets of 5 or in bulk from 18 - 76mm.
We use a M3 (5.5mm) bolt for 18-35mm discs and M5 (8mm) for 38-76mm discs.
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
{/tabs}
{tab Product Description}
Nyloc nut & bolt joints are used where a tight fitting joint is required, a nyloc nut is used to secure the limb or head on teddy bears.
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
{tab Product Data}
One complete set of 5 nyloc nut & bolt joints includes; 10 hardboard discs, 10 steel washers & 5 nyloc nuts & 5 bolts (one of which is longer to be used for ease of fitting when attaching the head of your teddy bears.
Nyloc nut & Bolt joints are available in sets of 5 or in bulk from 18 - 76mm.
We use a M3 (5.5mm) bolt for 18-35mm discs and M5 (8mm) for 38-76mm discs.
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
{/tabs}
{tab Product Description}
Nyloc nut & bolt joints are used where a tight fitting joint is required, a nyloc nut is used to secure the limb or head on teddy bears.
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
{tab Product Data}
One complete set of 5 nyloc nut & bolt joints includes; 10 hardboard discs, 10 steel washers & 5 nyloc nuts & 5 bolts (one of which is longer to be used for ease of fitting when attaching the head of your teddy bears.
Nyloc nut & Bolt joints are available in sets of 5 or in bulk from 18 - 76mm.
We use a M3 (5.5mm) bolt for 18-35mm discs and M5 (8mm) for 38-76mm discs.
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
{/tabs}
{tab Product Description}
Nyloc nut & bolt joints are used where a tight fitting joint is required, a nyloc nut is used to secure the limb or head on teddy bears.
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
{tab Product Data}
One complete set of 5 nyloc nut & bolt joints includes; 10 hardboard discs, 10 steel washers & 5 nyloc nuts & 5 bolts (one of which is longer to be used for ease of fitting when attaching the head of your teddy bears.
Nyloc nut & Bolt joints are available in sets of 5 or in bulk from 18 - 76mm.
We use a M3 (5.5mm) bolt for 18-35mm discs and M5 (8mm) for 38-76mm discs.
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
{/tabs}
{tab Product Description}
Nyloc nut & bolt joints are used where a tight fitting joint is required, a nyloc nut is used to secure the limb or head on teddy bears.
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
{tab Product Data}
One complete set of 5 nyloc nut & bolt joints includes; 10 hardboard discs, 10 steel washers & 5 nyloc nuts & 5 bolts (one of which is longer to be used for ease of fitting when attaching the head of your teddy bears.
Nyloc nut & Bolt joints are available in sets of 5 or in bulk from 18 - 76mm.
We use a M3 (5.5mm) bolt for 18-35mm discs and M5 (8mm) for 38-76mm discs.
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
{/tabs}
{tab Product Description}
Nyloc nut & bolt joints are used where a tight fitting joint is required, a nyloc nut is used to secure the limb or head on teddy bears.
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
{tab Product Data}
One complete set of 5 nyloc nut & bolt joints includes; 10 hardboard discs, 10 steel washers & 5 nyloc nuts & 5 bolts (one of which is longer to be used for ease of fitting when attaching the head of your teddy bears.
Nyloc nut & Bolt joints are available in sets of 5 or in bulk from 18 - 76mm.
We use a M3 (5.5mm) bolt for 18-35mm discs and M5 (8mm) for 38-76mm discs.
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
{/tabs}
{tab Product Description}
Nyloc nut & bolt joints are used where a tight fitting joint is required, a nyloc nut is used to secure the limb or head on teddy bears.
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
{tab Product Data}
One complete set of 5 nyloc nut & bolt joints includes; 10 hardboard discs, 10 steel washers & 5 nyloc nuts & 5 bolts (one of which is longer to be used for ease of fitting when attaching the head of your teddy bears.
Nyloc nut & Bolt joints are available in sets of 5 or in bulk from 18 - 76mm.
We use a M3 (5.5mm) bolt for 18-35mm discs and M5 (8mm) for 38-76mm discs.
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
{/tabs}
{tab Product Description}
Nyloc nut & bolt joints are used where a tight fitting joint is required, a nyloc nut is used to secure the limb or head on teddy bears.
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
{tab Product Data}
One complete set of 5 nyloc nut & bolt joints includes; 10 hardboard discs, 10 steel washers & 5 nyloc nuts & 5 bolts (one of which is longer to be used for ease of fitting when attaching the head of your teddy bears.
Nyloc nut & Bolt joints are available in sets of 5 or in bulk from 18 - 76mm.
We use a M3 (5.5mm) bolt for 18-35mm discs and M5 (8mm) for 38-76mm discs.
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
{/tabs}
{tab Product Description}
Nyloc nut & bolt joints are used where a tight fitting joint is required, a nyloc nut is used to secure the limb or head on teddy bears.
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
{tab Product Data}
One complete set of 5 nyloc nut & bolt joints includes; 10 hardboard discs, 10 steel washers & 5 nyloc nuts & 5 bolts (one of which is longer to be used for ease of fitting when attaching the head of your teddy bears.
Nyloc nut & Bolt joints are available in sets of 5 or in bulk from 18 - 76mm.
We use a M3 (5.5mm) bolt for 18-35mm discs and M5 (8mm) for 38-76mm discs.
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
{/tabs}
{tab Product Description}
Nyloc nut & bolt joints are used where a tight fitting joint is required, a nyloc nut is used to secure the limb or head on teddy bears.
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
{tab Product Data}
One complete set of 5 nyloc nut & bolt joints includes; 10 hardboard discs, 10 steel washers & 5 nyloc nuts & 5 bolts (one of which is longer to be used for ease of fitting when attaching the head of your teddy bears.
Nyloc nut & Bolt joints are available in sets of 5 or in bulk from 18 - 76mm.
We use a M3 (5.5mm) bolt for 18-35mm discs and M5 (8mm) for 38-76mm discs.
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
{/tabs}
{tab Product Description}
Nyloc nut & bolt joints are used where a tight fitting joint is required, a nyloc nut is used to secure the limb or head on teddy bears.
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
{tab Product Data}
One complete set of 5 nyloc nut & bolt joints includes; 10 hardboard discs, 10 steel washers & 5 nyloc nuts & 5 bolts (one of which is longer to be used for ease of fitting when attaching the head of your teddy bears.
Nyloc nut & Bolt joints are available in sets of 5 or in bulk from 18 - 76mm.
We use a M3 (5.5mm) bolt for 18-35mm discs and M5 (8mm) for 38-76mm discs.
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
{/tabs}
{tab Product Description}
Nyloc nut & bolt joints are used where a tight fitting joint is required, a nyloc nut is used to secure the limb or head on teddy bears.
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
{tab Product Data}
One complete set of 5 nyloc nut & bolt joints includes; 10 hardboard discs, 10 steel washers & 5 nyloc nuts & 5 bolts (one of which is longer to be used for ease of fitting when attaching the head of your teddy bears.
Nyloc nut & Bolt joints are available in sets of 5 or in bulk from 18 - 76mm.
We use a M3 (5.5mm) bolt for 18-35mm discs and M5 (8mm) for 38-76mm discs.
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
{/tabs}
{tab Product Description}
Nyloc nut & bolt joints are used where a tight fitting joint is required, a nyloc nut is used to secure the limb or head on teddy bears.
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
{tab Product Data}
One complete set of 5 nyloc nut & bolt joints includes; 10 hardboard discs, 10 steel washers & 5 nyloc nuts & 5 bolts (one of which is longer to be used for ease of fitting when attaching the head of your teddy bears.
Nyloc nut & Bolt joints are available in sets of 5 or in bulk from 18 - 76mm.
We use a M3 (5.5mm) bolt for 18-35mm discs and M5 (8mm) for 38-76mm discs.
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
{/tabs}
{tab Product Description}
Nyloc nut & bolt joints are used where a tight fitting joint is required, a nyloc nut is used to secure the limb or head on teddy bears.
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
{tab Product Data}
One complete set of 5 nyloc nut & bolt joints includes; 10 hardboard discs, 10 steel washers & 5 nyloc nuts & 5 bolts (one of which is longer to be used for ease of fitting when attaching the head of your teddy bears.
Nyloc nut & Bolt joints are available in sets of 5 or in bulk from 18 - 76mm.
We use a M3 (5.5mm) bolt for 18-35mm discs and M5 (8mm) for 38-76mm discs.
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
{/tabs}
{tab Product Description}
Nyloc nut & bolt joints are used where a tight fitting joint is required, a nyloc nut is used to secure the limb or head on teddy bears.
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
{tab Product Data}
One complete set of 5 nyloc nut & bolt joints includes; 10 hardboard discs, 10 steel washers & 5 nyloc nuts & 5 bolts (one of which is longer to be used for ease of fitting when attaching the head of your teddy bears.
Nyloc nut & Bolt joints are available in sets of 5 or in bulk from 18 - 76mm.
We use a M3 (5.5mm) bolt for 18-35mm discs and M5 (8mm) for 38-76mm discs.
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
{/tabs}
{tab Product Description}
Nyloc nut & bolt joints are used where a tight fitting joint is required, a nyloc nut is used to secure the limb or head on teddy bears.
Our single packs will be sufficient for 1 bear (5 joints)
Our 10 joint pack's will be sufficient for two bears
Our 50 joint pack's will be sufficient for ten bears
{tab Product Data}
One complete set of 5 nyloc nut & bolt joints includes; 10 hardboard discs, 10 steel washers & 5 nyloc nuts & 5 bolts (one of which is longer to be used for ease of fitting when attaching the head of your teddy bears.
Nyloc nut & Bolt joints are available in sets of 5 or in bulk from 18 - 76mm.
We use a M3 (5.5mm) bolt for 18-35mm discs and M5 (8mm) for 38-76mm discs.
Some of the M5 holes are a tight fit e.g. 38mm, 51mm and 76mm.
{/tabs}